Garage Door Repair - 5 Simple Things to Check

There are at minimum 5 simple things to verify, before calling a expert. Some repairs are very easy. For instance, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are very harmful and require assist from a expert.

Before continuing to the repair, make sure to unplug your garage door opener, so that you do not get an electrical shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a very bad place to get an electric shock, because you may also drop off the ladder. Also, keep in mind to put on security glasses when working with energy resources.

Right here is a list of issues to verify prior to calling for a expert for your garage door repair:

1. Verify the Metal Tracks for Damages

This simple garage door repair tip may often solve the problem very fast. The metal tracks frequently may have dents or bumps. If you find any such damages, strike the damaged part of the track with a wooden block and a hammer to straighten the track.

garage door repair elm grove

2. Verify the Alignment of the Tracks

If the tracks are not aligned nicely, they might be causing the door not to function. It's not always essential to unscrew the tracks you can just attempt to loosen the bolts or screws and to tap the tracks slightly into position. Use a degree to check the alignment of the tracks. Aligned tracks will allow you be done with your garage door repair in no time.

3. Clean and Dry the Tracks

Even though it may sound obvious, but hardened grime and old lubricant may be the cause of the garage door sticking. In this situation, your garage door repair might consist of merely cleaning the tracks and then drying them. You can use normal cleaners to clean the tracks.

emergency garage door service elm grove

4. Lubricate the Tracks and the Rollers

Simply lubricating both, the tracks and the rollers, can fix the issue and conclude your garage door repair in no time. For lubrication, you might use a lubricant spray or a silicon spray. It is most likely better to lubricate the tracks after cleaning them. Really, any movable part will benefit from lubrication.

five. Tightening the Loose Bolts and Screws

Bolts and screws tend to turn out to be free with time. Attempt to verify all of the screws and bolts concerned in the opening/closing system of your door. Occasionally, merely tightening them might solve the whole problem. If you can't tighten the screws, simply because the holes on their own have turn out to be loose, then you can use a "wood filler" or pieces of regular wooden to fill the holes.

What Not to Do?

If you have attempted every 1 of the over options, and none of them have worked, the issue might be the door spring. Nevertheless, it is advised not to carry out your garage door repair if the problem seems to be the spring, particularly if it's a torsion spring. Sadly, there have been numerous instances, where individuals have gotten hurt or even killed by the garage door springs.