A Quick Guide to Servicing Your Vehicles Transmission Most new vehicles are relatively maintenance-free, and engine technology has become so computerized throughout the last a long period that a majority of people feel the entire life of their car without ever opening the hood. That is both bad and good simply because this capability to practice benign neglect along with your car has resulted in several misunderstandings about necessary car maintenance. Proper tire pressure on all 4 tires improves fuel useage as it keeps your vehicle handling better. If you maintain the tire pressure at optimum levels it can help the car flow from the air better and travels far more smoothly. As a result, your gasoline consumption will also be improved. Also, take into account that the higher the vehicle handles, the higher it runs. It will be less at (view link) risk of obtaining a flat tire, less prone to slide. The pressure of your respective tyres keeps you safe while driving. If tyres are under-inflated the automobile uses more fuel and is also less able to handle well, of course, if tyres are over-inflated the grip on the highway surface suffers. It is advisable to check tyre pressure regularly, ideally once a week and once monthly at least. You should also look into the pressure of your spare tyre too. The correct tyre pressure will probably be shown with your cars manual, and its also worth doing as you will spend less to 10% on fuel as soon as your tyres are at the correct level. Each month you should inspect your vehicles lights to ensure they are functioning. To do this, just turn on your automobile and obtain out. Walk around, inspecting headlights, tail lights, side lights, and brake lights. In order to look at your brake lights, you will need another person to press the brakes when you look. If no one is around, you can use a heavy rock or brick to apply pressure for the brakes as you investigate. If a light just isnt working, take your car towards the mechanic. There should be a particular point on the body work with the car which is suitable for the jack to attach to, while using the tools, obtain the point and make sure the jack stays set up. You should be careful to make sure you avoid the jack in the wrong place as this can break the bodywork or trim. Before raising the auto you will have to loosen the nuts on the wheel you are replacing, this is because the wheel will still only spin round if you try to loosen the nuts once elevated.