Exploring the Reasons Head Gaskets Fail Your vehicles head gasket (HG) is sandwiched between your cylinder head and engine block. The part serves multiple purposes. First, it prevents coolant from seeping into each cylinders bore. Second, it will help maintain pressure within the engine by sealing off of the combustion chambers. The operation and satisfaction of your respective car are heavily influenced by the HGs capacity to keep your seal intact and free day insurance from leaks. If you have an older timepiece car, the first thing to do is look into the oil level, brake and transmission fluids. These seem to get low fast on the older models. Buy the fluids which are specifically made for your brakes or transmission and obtain the right weight of oil. Usually, it will be possible to get this information around the drivers side doorway. If not, visit an auto parts store and theyre going to help you. You cannot know how much use a second-hand tire has experienced, nor the sort of stresses many experts have subjected to. The amount of tread left is not a true indication of the real wear and tear that has been applied. It is fairly easy for any used tire to get nearby the end of their useful life, but present the appearance of only being lightly worn. - Drive safelyCars using a good accidents dont have good car or truck values. You surely dont especially like buying damage goods and the same costs others too. This is the reason the reasons you would see in classified advertisements the vehicle on discount sales wasnt associated with any accidents. Should yours meet one, go to a good body paint shop to make it sprayed. Also, choose original replacement parts. Be honest about previously being in an accident as trained car value appraisers can detect any actively works to our bodies even from the distance. Not revealing the history of the car might trigger the possible buyer to believe that the accident is much more serious that its. Check your oil level weekly once the engine is cold, by removing the dip stick. Wipe clean and replace. Remove again and make certain that this oil level mark is relating to the minimum and maximum levels as indicated on the dip stick. Top up if needed with a suitable oil to your car, as describe within the Car Manual, ensuring you cannot over fill because this could lead to excessive oil pressure within the engine which may cause leaks or even damage.