There are a several definitions to the term "crosshead", the property industry standard for the term is the term for remedy employing a mixture of molding and also other millwork above a window or doorway. The thought of by using a crosshead isn't new, but has become borrowed from your feature seen in early Grecian architecture, called an Entablature. This term refers to a superstructure of ornate details and moldings employed to encapsulate or carved onto the face of lintels, the beams which span from column to column of an classic structure, just like the Parthenon. The Entablature incorporates the architrave, the frieze, the cornice, plus the pediment. Within those elements, come a lot of the features utilized in modern architecture. Today, the classic door surround uses pilasters on each side from the door to copy the design of columns. On top of the door, a crosshead can be used to duplicate the design of the architrave, frieze, and cornice. The triangular or arched feature over a crosshead is known as a pediment. Many other architectural details, including dentil molding, corbels, and carving inlays, were created from the entablature. The frieze was used being a "billboard" because era, in an effort to generate a statement of grandeur or send a message of their might, by the details carved in to the stone.
The classic crosshead is made up of four basic features; the cap, the frieze board, the molding, plus the base, which is analogous to features within a mantel. Full functionalities on the crosshead are determined by the frieze board length and width. The capacity of the frieze is dependent upon the complete width with the door or window, for example the casement molding. The frieze board would be the body from the crosshead and determines a great deal of the height. The molding typically used is really a crown molding, that is utilized to produce visual depth. The optional by using keystones, carving inlays or dentil trim provides detail for the frieze board. Though some may choose the simple classic lines, although some prefer the ornate.
A crosshead can be employed outside above windows or entry doors. Vinyl, urethane foam or resin materials are normally utilized for exterior applications. Typically, interior crossheads are created from wood. The wooden crosshead provides the flexibility of custom sizing and special features, while foam, resin, or vinyl provides each advantage of weather resistance and decay. Whether used over a featured entryway or over all of the windows or doors inside a house or office, a crosshead is surely an often overlooked feature to create a decor together.
Today, crossheads are made-to-order and so are readily accessible. They are an easy task to install with some common household tools and could be installed above existing trim work or incorporated in new construction. Small architectural details, just like the crosshead, can easily still produce a dramatic statement.
For details about door molding web site: look at this.