A few handful of definitions with the term "crosshead", the structure industry standard for the term refers to a remedy utilizing a combination of molding along with millwork above a window or doorway. The idea of using a crosshead is not new, but has become borrowed from your feature found in early Grecian architecture, called an Entablature. This term identifies a superstructure of ornate details and moldings employed to encapsulate or carved on the face of lintels, the beams which span from column to column of an classic structure, just like the Parthenon. The Entablature incorporates the architrave, the frieze, the cornice, along with the pediment. Within all of the elements, come most of the features used in modern architecture. Today, the classic door surround uses pilasters on spare on both on the door to duplicate the look of columns. Across the door, a crosshead is used to copy the design of the architrave, frieze, and cornice. The triangular or arched feature over a crosshead referred to as a pediment. Several architectural details, such as dentil molding, corbels, and carving inlays, were produced from the entablature. The frieze was adopted as being a "billboard" as era, so as to create a statement of grandeur or send a communication of their might, from the details carved in the stone.
The classic crosshead contains four basic features; the cap, the frieze board, the molding, and the base, which is similar to features present in a mantel. All the features from the crosshead are determined by the frieze board size. The length of the frieze depends on the width on the door or window, such as the casement molding. The frieze board may be the body of the crosshead and determines high of the height. The molding typically used is often a crown molding, that is utilized to provide visual depth. The optional usage of keystones, carving inlays or dentil trim provides detail to the frieze board. Though some may choose the simple classic lines, and some prefer the ornate.
A crosshead can be utilized outside above windows or entry doors. Vinyl, urethane foam or resin materials are normally used by exterior applications. Typically, interior crossheads are constructed from wood. The wooden crosshead increases the flexibility of custom sizing and special features, while foam, resin, or vinyl increases the benefit of weather resistance and decay. Whether used over a featured entryway or over the many doors or windows in a very home or office, a crosshead is definitely an often overlooked feature to bring a decor together.
Today, crossheads are made-to-order and so are easily obtainable. They can be easy to install by common household tools and could be installed above existing trim work or incorporated in new construction. Small architectural details, including the crosshead, could make a dramatic statement.
More details about door molding take a look at our web portal.