Some of Super Laser Pointer Blue or pointers
Given the name and appearances, the first obvious thought is that perhaps lightsabers consist of some kind of Green 1mW Laser Pointer pen . However, this hypothesis is easy to rule out. Lasers don't have a fixed length, as you can determine using a simple laser pointer. Further, unless the light is somehow scattered, a laser is essentially invisible as it passes through the air. Neither of these characteristics describes a lightsaber.
THE PILOT of a small aircraft was dazzled by a Air rifle laser sight as he flew his plane over Droitwich.The incident happened about 6.15pm on Friday (December 11) when the beam of light was directed straight into the cockpit of the plane.
Fortunately, he remained in control of the aircraft and continued on his journey but, police say, it could have been a lot worse.He later landed the aircraft safely at Wellsbourne Airfield.Officers investigating the incident want to hear from anyone who was in Home Piece or Wey Close on Friday evening who may have seen something.Sgt Dave Knight, of Droitwich Police, said: “I'm particularly interested in anyone locally who has been selling these kind of Red laser pointer 5mW 3in1.”
And he added that, whilst some of Super Laser Pointer Blue or pointers were legal, there were some which were against the law.Witnesses or anyone with any information on this incident or on the sale of laser pens in Droitwich should call police on 101 or Crimestoppers on 0800 555 111.
Green laser pointers are inexpensive and readily available in hobby stores and electronics shops. Hacking a green laser pointer is done by destroying the circuit board limiter that keeps the laser from being as powerful as that of an expensive model. The hacking that needs to be done to the green laser pointer is not complicated to do and just requires following a few steps in an exact order.
Remove the battery cap from the green laser pointer. Remove the batteries. Put the battery cap and the batteries aside.Hold the front and the back of the green laser pointer between two hands. Twist the two halves of the laser pointer until the glue in the seam at the middle cracks.
Remove the front half of the green laser pointer that has the lens in it. Put that half aside.Take the jeweler's screwdriver and adjust the exposed screw at the front of the laser mechanism. Turn the screw in a clockwise direction until it can no longer be turned.