In such a situation, the best way to get the shine and smoothness back is to refinish the floor. If you prefer to do the task yourself, you can surely save a lot of money on the contract expenses, which mainly include the labour charges that may differ from locality to locality. However, you would need certain tools and equipment for doing it yourself, like the drum sander, a buffer, and other essential materials. However, after a substantial amount of time, the floor becomes dull and loses its shine. Generally in refinishing hardwood flooring, it is recommended to get the job done by a professional contractor, as the project consists a lot of dust work, which, if done by you, can pose danger to your health. Some professional contractors might also use conventional sanding systems which have bags attached to the equipment. The refinishing procedure usually consists of sanding down the wood and applying 2-3 coats of finish. Worn/bare spots and dirt are likely to appear on it over time.
Helpful Guidance On Choosing Fundamental Aspects For Finishing Oak
Renting a sander may cost you about BSD 150-250, whereas renting a buffer might cost you approximately BSD 50-100. You also need to note that these rental charges may increase depending upon the duration the project. Some professional contractors might also use conventional sanding systems which have bags attached to the equipment. But if the floor to be worked upon has worn out considerably, you may be charged a little extra. In hiring a professional contractor, you need to note that most part of the overall expenses is the labour charges. The refinishing procedure usually consists of sanding down the wood and applying 2-3 coats of finish. If you consider the cost in a day project, the expenses can vary according to what type of tools and materials you use. In some cases, the labour charges may even be around BSD 3-4 per square foot.