When the summer is coming , the water temperature raise and poor refrigeration are the most common problem.
Below is troubleshooting.
1. The cooling capacity of chiller is not enough to cool down the machine, therefore, please replace another chiller with large cooling capacity.
2. After long term running without cleaning and too much dust accumulating, the filter gauze needs to be uninstalled and washed. Besides, clean the interior dust of chiller and wash the water route.
- S&A recommended CW-5300 chiller to cool the aluminum plate at 200℃ to 23℃ in 4 minutes
- The cooling of the 3KW fiber laser by S&A CW-7300 water chiller with dual temperature dual pump
- The cooling of chemical laboratory apparatus by S&A water chillers
- Dual temperature & dual pump series water chiller recommended by S&A to support 1,500W or higher Raycus laser
- The cooling of EFR 80-100W laser glass tube with S&A CW-3000 water chiller
- Purchase of S&A CW-7900 water chiller by a New Zealand university laboratory for cooling the charge-coupled device (CCD) camera
- Another purchase of S&A CW-6100 water chiller by a Japanese customer of semiconductor laser