Some professional contractors might also use conventional sanding systems which have bags attached to the equipment. So, if you want to get a 15x15 feet room re-coated or screened, you would need to spend approximately BSD 200-250. But if the floor to be worked upon has worn out considerably, you may be charged a little extra. In hiring a professional contractor, you need to note that most part of the overall expenses is the labour charges. Professionals have specific systems that take care of the air quality of your house during the refinishing, known as dust extraction systems. Renting a sander may cost you about BSD 150-250, whereas renting a buffer might cost you approximately BSD 50-100. There are several determinants to be considered in order to get a general estimate of the expense. Refinishing hardwood floors is generally taken as a part of home improvement project. If you prefer to do the task yourself, you can surely save a lot of money on the contract expenses, which mainly include the labour charges that may differ from locality to locality. You also need to note that these rental charges may increase depending upon the duration the project.
An Introduction Finishing Oak
You also need to note that these rental charges may increase depending upon the duration the project. Worn/bare spots and dirt are likely to appear on it over time. If you hire a contractor, the cost of applying a redcoat on the floor can be around a dollar per square foot. When you think of getting the hardwood flooring refinished, you most importantly need to consider the cost. The average cost ranges between BSD 2-4 per square foot. The refinishing procedure usually consists of sanding down the wood and applying 2-3 coats of finish. But if the floor to be worked upon has worn out considerably, you may be charged a little extra. However, after a substantial amount of time, the floor becomes dull and loses its shine. Some professional contractors might also use conventional sanding systems which have bags attached to the equipment.