Garage Door Repair - 5 Easy Issues to Verify
Some repairs are very easy. For example, a rigid or a squeaky door will simply require a great cleansing and lubrication. Other repairs, this kind of as repairing a torsion spring, are very harmful and need assist from a professional.
Before continuing to the repair, make sure to unplug your garage door opener, so that you do not get an electric shock while you are fixing your garage door. You will most most likely be standing on a ladder, which is a very poor location to get an electrical shock, since you might also fall off the ladder. Also, remember to wear safety glasses when operating with energy resources.
Here is a list of issues to verify prior to calling for a professional for your garage door repair:
1. Check the Metal Tracks for Damages
This simple garage door repair suggestion might often solve the problem very fast. The steel tracks frequently might have dents or bumps. If you find any this kind of damages, strike the broken part of the track with a wood block and a hammer to straighten the monitor.
emergency garage door service elm grove
2. Check the Alignment of the Tracks
If the tracks are not aligned well, they might be causing the door not to work. It's not always necessary to unscrew the tracks you can just try to loosen the bolts or screws and to tap the tracks slightly into position. Use a level to verify the alignment of the tracks. Aligned tracks will allow you be done with your garage door repair in no time.
3. Thoroughly clean and Dry the Tracks
Even although it may audio obvious, but hardened grime and previous lubricant may be the cause of the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks and then drying them. You can use normal cleaners to clean the tracks.
4. Lubricate the Tracks and the Rollers
Simply lubricating each, the tracks and the rollers, can repair the issue and conclude your garage door repair in no time. For lubrication, you might use a lubricant spray or a silicon spray. It is probably much better to lubricate the tracks following cleansing them. Actually, any movable component will advantage from lubrication.
five. Tightening the Loose Bolts and Screws
Bolts and screws have a tendency to turn out to be free with time. Attempt to check all of the screws and bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole issue. If you cannot tighten the screws, because the holes themselves have become loose, then you can use a "wood filler" or items of normal wooden to fill the holes.
What Not to Do?
If you have attempted every one of the over solutions, and none of them have worked, the issue might be the door spring. However, it is advised not to perform your garage door repair if the issue seems to be the spring, particularly if it's a torsion spring. Unfortunately, there have been numerous cases, where people have gotten hurt or even killed by the garage door springs. One of the most common injuries is a strike in the head, ensuing in serious trauma to the brain.