Pull off to fun with the Attop YD-716 handheld remote control quadcopter!

Looking and awesome quadcopter? Your search! The Attop YD-716 handheld remote control quadcopter is included with two cool Leds and contains that has a protective exterior shell to be sure the blades go on for a very long time. It quad-rotor blade design offers you an excellent and stable flying experience in addition to easy operation. Best for both indoor and outdoor use, this quadcopter provides you with an average of 6 to 9 minutes of flight time having its high capacity Li-Po battery and in many cases features a spare battery so that the fun lasts! Take off to fun using the Attop YD-716 handheld control quadcopter!
Gadgets, a vital part of the company baby’s lifestyle, because their pharmicudical counterpart is in the progression period, them could be the practical things round her everyday activity. Attop YD-716 4 Channel RC 3-Axis Flight Control UFO Quadcopter w/LED Lights was designed to build a thrilling, enjoyable to realize besides practice some abilities, guide children create and incorporate well several several environments, creating a good conditions helps youngsters comprehensive continuing development of real and individuality. This quadcopter has a specially design canopy provides protection on the blades. 4 channel function provide stable flying and simple operation. A very high capacity battery and robust motor allow the helicopter to fly for a longer time and faster.

Some minor points that could most likely not upset most users yet still show too little editorial diligence by the makers: I have seen several photos and illustrations in this model depicting the headlights to be white (on the box), red (above, a highly regarded view on this very page at Amazon.com) or green (another online illustration). All four of mine sported blue headlights; I do believe which is the only color they've got. Also, no mention is directly made that the user should provide his very own USB port (using a computer, powered hub, etc.) or USB-format charging device -- no USB-format power adapter is roofed; there may be simply a charger plugging from a USB port and the battery. My boxes experienced a piece of black tape applied to the reduced left corner on the front, within the vague words "USB Charger" (which IMO doesn't clearly indicate what exactly is included and required).
Often because of a hard crash, or sometimes with no no reason at all, the copter's onboard electronic gyroscope may go away from calibration. During these moments, the copter can be unflyable, or may necessitate a lot trim offset who's has severely reduced maneuverability and seems to be underpowered. There exists a uncomplicated procedure to re-calibrate the gyro:
1. Fire up the quad's battery, and immediately position the quad upright on a flat, level surface.
2. Wait about Ten seconds for that gyro to stabilize.
3. Switch on the controller, center each one of the trim knobs (the pointers may be hard to discover but helpfully the transmitter beeps once, whenever a trim knob is ventured into its center position), then complete the standard procedure to bind the controller to your quad by pushing the left stick fully forward, pause for a second, then pull the left stick fully back.
4. Move the left stay with its back left corner, and the right adhere to its back right corner, and hold them there around an extra -- when you can see the red LED on the quad's circuit board, it's going to blink once. The controller may also beep once.

More details about attop yd-716 check this useful site