Tire Dressing Tips For Vehicle Owners

A lot of wear and tear is put on your tires. Havoc is wreaked on your tires from daily with elements, such as ultraviolet rays, tar, dirt, water, mud, salt, grease, brake dust and grime. This not just causes damage to your wheels as time passes but also gives them a shabby appearance. You want to prevent the rubber from degrading while keeping the tires looking just like new when you detail. You can boost the overall appearance of your vehicle with well-maintained wheels. You can get the protection you need and give your vehicle that fresh-off-the-showroom-floor look when you apply tire dressing.

Dressing Varieties

There are two varieties of dressing available: solvent-based and water-based. While the water formula is a fairly new alternative, the solvent formula is the most widely used. They both have their advantages and disadvantages, but both types provide protection against fading and cracking while enhancing the look of the tire. The finished look that you want will influence the dressing type you select. In addition, there are other distinctions between these two that are worth looking at prior to making a purchase.

The Solvent-Based Variety

A solvent formula is the go-to selection if you want a high gloss or wet look for your tires. Containing hydrocarbon silicone, it is a sticky, clear or blue-tinted liquid. The downside with this particular formula is the sling that gets on the vehicle’s paint. The dressing comes off and commonly lands on the rear fenders or rocker panels when driving. It can dry or set, leaving a mark on the paint if not removed immediately. It attracts dust and dirt since it is sticky. It may gum up when there is too much overspray or buildup. You can guard against this by cleaning the tires thoroughly before each new application.


If it's slick and milky-white in appearance, it is water-based dressing. It provides a satin shine or matte finish just like the way tires look when they come from the manufacturer. To protect against sun damage, some brands have UV ray protection included in the formula. The potential for sling is minimal. If it does get on the vehicle’s paint, it won’t do any damage because the dressing is generally made with a chemical-free formula. It's eco-friendly, unlike its counterpart. In addition, it’s a lot more versatile because it can be applied to vinyl, rubber bumpers and window stripping.

How It Is Applied

You can apply both dressings as a spray, foam or gel. Sprays are typically available as an aerosol or pump. The aerosol is sprayed directly on the tire’s surface. The coverage offered is even, but be careful when using it on the paint and wheels because it is very easy to overspray. A pump spray is applied to a sponge, rag, soft pad or soft brush and then rubbed onto the tire. When using gels or foams, you wipe it on the rubber directly. Whichever application you employ, it must dry completely before moving the vehicle.

Heed the Safety Warnings

There are safety measures you must take when using either dressing type. You must never apply these products to tread; this is the most critical thing to know when utilizing these products. The tires will be slippery if you do and this is a serious hazard. For motorcycles, this is also true. Make sure you wear protective gloves when working with a solvent-based brand. Always follow the manufacturer’s directions on how to correctly apply the products.

You want your automobile looking as good as the day you drove it off the dealership car lot. It takes work to keep it looking new, especially the wheels. You can protect and revitalize the look of worn tires and provide the appropriate finishing touch to a well-detailed automobile if you utilize tire dressing.

Choose water based tire dressing from American Detail Supply for the most effective results possible. More details on American Detail Supply are obtainable at the organization's web page, http://www.americandetailsupply.com/.

Tags: tire dressing, professional tire dressing, water based tire dressing