4 Common Methods which are utilized for the Casing Inspection

4 Common Methods which are utilized for the Casing Inspection



Would you know what exactly Casing Inspection is?


Casing inspection is basically used to find out if there are any holes, cracks or anywhere exactly where fluid can enter or exit. It doesn't only flaws cracks and all, but it also notices germs buildup and everything.


So, there are about 4 common methods that are utilized for casing inspection and here are all 4 of them;


1.    Cased Hole Calipers:


Cased-hole calipers are accustomed to detect the modifications in the diameter of casing, because they can also be the symptoms of rust and they're also accustomed to keep a verify around the casing deformation.


These calipers have multiple casing sizes, that are from 4 to twenty and when one requirements to do a tube inspection then they can easily use its little dimension for it. The only uncommon disadvantage of this casing inspection is the fact that it could harm the casing by itself, though now it's not essential simply because of the modern and advanced electronic tools.


Although you will find 2 kinds of caliper, one is mechanical and the other one is digital. The sole distinction between them will be the way they document their data. The digital one is much more correct although.


2.    Flux Leakage Tools:


It is a way, which demands a strong magnetic area to determine the cracks and gap and the best part is the fact that it also identifies the corrosion of each, inner and outer surfaces of the casing.


Within this method, some of the resources also have sensors, so that it signifies. The chief advantage of this flux leakage tool is the fact that it could determine localized defects also, which other casing inspectors doesn't. It can determine in big and little holes also, which as well from within and outside of the pipe.



3.    Electromagnetic phase-shift Resources:


This casing inspection is essentially accustomed to estimate the thickness if the casing. Something which is not really great about this casing inspection is that its spatial resolution is weaker compared to the other two casing inspections.


This situation inspection instrument is best to investigate the corrosion which is on bigger scale.


4.    Ultra-Sonic Tools:


The best thing about this casing inspection toll is the fact that it offers you with a complete assessable document of the thickness and the radius of the casing. With this particular tool, you cannot begin to see the outdoors of the surface and it is essentially use for inner surfaces and also to open a gap.


This instrument isn't the best option for casing inspector and if you would like right measurements then you ought to use other resources.


So, they are the four fundamental and customary methods used for casing inspections.