RCD Sockets what type should you use latching or activePassive Residual Current Devices (RCD,s) Latching RCD
RCD Sockets what type should you use latching or active
When the power is lost due to an earth fault, the RCD wall socket trips out and isolates the circuit it is protecting. Latching RCD’s do not trip during power cuts so they are great for fridges and freezers. This also makes them ideal for protecting some heating equipment set to “Frost Protection”, fish tanks, battery charging, and the protection of remote or unmanned areas.
Active Residual Current Devices Non Latching RCD
This is the most common use of RCD sockets, an Active residual current device will trip the power within 40ms, power will not be resumed until the rcd socket is reset.If there is a power cut the Active RCD will not reset itself we have set out below some of the electrical equipment that should be protected by an active RCD Socket.
Garden power tools such as lawnmowers and hedge trimmers.
Hand held power tools like drills, jack-hammers and saws.
Kitchen appliances, kettles, food mixers and blenders etc.
Electrical equipment that moves like vacuum cleaners and floor polishers.
Hand held electrical devices like hair dryers, curling tongs and electric knives If you have any sort of inquiries pertaining to where and just how to make use of double rcd wall socket, you could contact us at the web site.