If you are going to acquire ceramic tiles to get a ceramic tile backsplash, ceramic tiles, wall tiles or perhaps ceramic tiles for ornamentation to assist factors to find out in picking which tile is the best for your application. Don't assume all tiles are the same as well as the differences can see whether your ceramic tiles will hold up to the use you happen to be putting them.
For example, low fire tiles or tiles which have only undergone a bisque firing are generally more affordable although not nearly as durable as high fired tiles. Whether or not the tile may be glazed, it could continue to have only been subject to one firing and simply a low firing therefore the fact than it being glossy and colorful is no indication that this tile contains the toughness for a high-fired tile. Greenware - ceramics which has dried although not been fired, can be glazed which has a low fire glaze and fired to a comparatively low temperature.
This kind of cermic tile wouldn't be suited to certain applications. As an example if you intend to utilize the tile for a backsplash, counter top or tabletop you might need a very durable tile that will hold up to frequent cleaning along with the truth of the countertop or tabletop, some hard use too. Stoneware clays include the most suitable because of this sort of use. Stoneware is commonly fired to about cone 6 (around 2200 degrees F) and is also quite strong.
But also in your inquiry, don't stop in what sort of clay the tiles are made from. Glazes vary enormously as well as so-called 'food-safe' glazes can leach out chemicals, stain and lose their color. Many manufactured tiles are poorly made will not hold up to the uses these are marketed for. Of course, there are many quite excellent manufactured tiles too and that means you should inquire to make sure. That information however may you aren't be easily obtainable.
The kind of ornamentation with the hardwood is important too. For a ceramic countertop or tabletop, the tiles ought to be flat. For a backsplash the tiles might have low relief but high relief will probably be tough to clean and just isn't generally advised.
Fireplaces, murals, mosaics and facades might be either flat, have low relief or high relief and occasional fire glazes are OK in these applications. Be mindful though with areas which get much use, such as around a hearth where logs will be placed or fireplace tools will probably be used. Low fire tiles and glazes can crack or chip far more easily than stoneware and also fire glazes. Also, when it is a region that will require frequent cleaning, high relief may prove troublesome.
For ceramic walls in dry areas not susceptible to much physical contact the majority of kind of tile and glaze is adequate. For wet areas flat tiles, low relief tiles or perhaps high relief tiles can be used as long as they're not in the hazardous place a body can inadvertently touch them. A big frog leaping out from your shower wall at body height is probably not recommended.
Flooring presents other challenges, and opportunities. Clearly flooring should be durable excessive fire stoneware is the greatest choice. Any kind of relief is not advised as uneven surfaces can be difficult to steer on, especially for the over 60's. One more consideration with flooring tiles is slickness. A glossy glaze with a floor is not recommended. A heavily textured glaze or possibly a matte glaze is best.
Check out about ceramic tiles go this popular resource.