How To Repair Samsung Galaxy Mega Screen
Did you accidentally crack the touch screen of your Samsung Galaxy Mega and don’t you know how to have it fixed? Service centers are very often too slow and expensive; but, if you have dexterity enough, you may try to repair it by yourself. It’s quite simple, and you will save time and money.
STEP 1: Turn off the phone, then remove the back cover and the battery:
STEP 2: Now screw off all the screws from the back of the device.
STEP 3: Now, gently remove the middle frame with a plectrum or a plastic tool, levering between the glass and the frame itself.
STEP 4: Disconnect the connectors.
Now, unstick the volume rocker keys, helping with a plastic tool. Be gentle and avoid doing it with your fingers because you could damage them. Then tear out the flat connector and the antenna connector as shown below.
STEP 5: We suggest to remove the motherboard, too: you will have more space in order to unglue the touch screen. Remove the screw holding the motherboard and lift it gently:
STEP 6: Perfect! Now you’re ready to dislodge the touch screen (together with the Samsung Galaxy Mega LCD) from the frame. With a hair dryer or a heat gun, heat the edges of the glass for 1-2 minutes, in order to make the biadhesive easier to tear out.
STEP 7: Now apply a suction cup and raise the glass, then insert two thicknesses in the angles (we used two plectrums). Unstick the soft keys from the glass with a plastic tool. Make sure to free them from the biadhesive as you could rip off them.
STEP 8: Use a plastic tool to tear out the glass from the frame. If it’s too hard to remove, heat again the area; Anyway, be patient and gentle. Drive the LCD connector out of the phone and make sure that the soft keys aren’t damaged.
LAST STEP: Make sure that the spare part is equipped with biadhesive. If not, apply some on the edges and insert the new LCD. Reassemble the phone, following reversely the previous steps. Complete your samsung galaxy mega lcd replacement .